tunzeannounced that their Osmolator 3155 would be getting some upgrades, the biggest of which would be a magnet holder system that would allow you to attach it to your sump, or aquarium. Recently I received a review unit to play around with and then I installed on a 20 gallon nano aquarium.
One of the biggest complaints with the Tunze Osomolator was the mounting or fixture device that attached the float and sensor valves to your sump or aquarium. It was a big pain. Generally, you had to get your caulk gun and pray that you had a largest sump to attach the sensors. No longer will this be necessary.
Tunze从他们的Tunze Nanostreams磁铁中借了借来,并创建了一个独特的磁铁,该磁铁将传感器固定在适当的位置,使您的礁瘾君子几乎可以将传感器连接到所需的任何地方。Tunze告诉我们,我们不必担心磁场在解决此问题时会干扰浮子阀。
The newly upgraded 3155 does a great job of keeping my water at a constant level. The nicest part of the Tunze system is that it uses an optical sensor. Optical sensors are far more reliable than float switches which is used in most of the cheaper auto top off systems out on the market today. The reason is simple, they are just more reliable with upgraded technology, an optiacal eye versus what is essentially a “trip” system.
光学系统的一个重要神话是“盐蠕变会堵塞光学传感器”。真正使这个单位值得的是光学传感器,这东西不会失败。您不会像标准的浮子阀那样从光学传感器那里获得误报。If you have a decent sump or aquarium with water flow you won’t have to worry about salt screep “clogging” the optical sensor, with my test aquarium I have a low 500 GPH lone water pump through my sump area and haven’t had any problems.
There is an added calcium reactor (read: kalk reactor) that can be attached to this unit, which I have used in the past. This is a very simple way to get a steady PH while giving your corals the nutrients they need. Again, if you have a smaller aquarium its worth checking out as an additional upgrade item ($90) to the system. You’ll need to shake the reactor up and down every week to mix the kalk, and add kalk to replace what is used.
The Tunze Osmolator 3155 is great for aquariums under 100 gallons. If you have an aquarium over 100 gallons I wouldn’t suggest investing in this unit, as the pump is much to small to keep up with evaporation. I would love to see Tunze come out with an upgraded model to handle larger systems with ease, like those over 150 gallons with higher evaporation rates.
总体而言,这是您可以购买的最佳自动顶部。它具有TUNZE的可靠性和支持以及光传感器中的先进技术。谁知道,通过添加磁铁支架,它将成为更理想的产品?如果还没有,则该产品需要在您的愿望清单上。
有关渗透器3155的更多信息
1983年,Tunze Aquarientechnik已经将第一个水位调节剂(渗透压剂)引入了水平。Tunze Aquarientechnik开发了新一代的渗透调节剂,具有IR技术中静态和紧凑的传感器,用于淡水和盐水水族馆的恒定水位调节。它通过精确且定期补偿蒸发的水来确保淡水和盐水水族馆的渗透稳定性。
驱动器Universal 3155 can be used as a supplement in cabinet filter plants, COMLINE quick-run filters or directly on the tank edge.
Water level regulator with two sensor holding devices, extension and numerous fastening accessories. It is suitable for use in cabinet filter plants, in Comline filters or on the edge of the aquarium.
该渗透调节器也可以用于Tunze System橱柜滤网中。传感器可以粘在玻璃表面上,也可以直接安装在水箱的边缘。
Delivery condition: Ready for mounting with power supply unit, metering pump, hose, sensor holding device
计量泵容量:0.9 m(35.4英寸):52 l/h(13.7 US GAL./H);1.5 m(59英寸):47 l/h(12.4 US GAL./H);2 m(78.7英寸):27 l/h(7.1 US GAL./H);HMAX:2.2 m(86.6英寸)。
Metering pump capacity: 2.95ft: 13.74gph, 4.92ft: 12.42gph, 6.56ft: 7.13h, Hmax: 7.22ft
输送条件:准备安装电源单元,计量泵,软管,传感器固定装置。
Metering pump capacity: 0.9 m: 52 l/h, 1.5 m: 47 l/h, 2 m: 27 l/h, Hmax: 2.2 m
1.通过非固定光传感器和晶体管开关没有任何运动部件来确保精确的水位。该传感器对污染,光或磁场不敏感。
它的“自动之眼”精确地识别出水位,即使是小波或水平变化也无法刺激单位。
2.具有单独的电源电路和继电器控制的独立安全传感器可确保可靠的溢出保护。
3.电子定时控制器和电流限制er for the pump connected result in a higher operational safety. This unit protects the metering pump against running dry and reports an empty storage container.
4. All functions are clearly displayed by LEDs; safety messages are also indicated by acoustic signals.
5. The osmotic regulators are all operated at safety extra-low voltage.