So reboot phase 2 was all about the tear down. It wasn’t an easy time. A lot of corals were lost in the holding tanks despite my best efforts. It was definitely a low point. I would say there were two moments where I asked myself, “Why am I doing this?” The first was the loss of corals to a heater, and the second was the mad dash to get the new tank running before my wife gave birth! When you’re dealing with pvc cement fumes at 2am in the morning on a weeknight, your reef keeping questions become existential.
我上一篇文章几天后,坦克和站着来了。大多数人会表达兴奋,但对我来说,这更令人欣慰。松了一口气,因为我所有的自定义请求都非常完美,而且还因为我的时间很短,无法让坦克运行。DSA坦克上的制造质量非常出色。接缝很专业,后玻璃上的黑色色调很好。溢流箱以丙烯酸为单位,但用玻璃加固。我担心27英寸的高度可能太深了,但是我可以在没有手臂的情况下到达底部。
The stand and canopy from Aquarium Wood Products came well packaged. The paint job on the outside was outstanding. My only gripe was that the inside of the stand and canopy were not as protected with paint. I’m a pretty messy guy and get water everywhere, and humidity from evaporation was also a concern. So I went ahead and painted the insides with a weatherproof exterior grade paint. This added some delays, but I felt it was a good move longterm. I knew I wanted to start off with metal halides, so I promptly drilled two 4” holes in the canopy for fans as well.
有了48英寸的污水处理,我必须创造性地将所有东西都安装在坦克下面。我宽敞的地下室污水已经一去不复返了。这次我必须保持简单。我还想使这个礁石的心脏(过滤)吸引人,并使您可以在假期期间可以观看坦克的非旅行者理解。
对于初学者来说,我决定在常规附表80或40上使用一些彩色的PVC。作为荷兰语,我认为对油箱的橙色味道很好。橙色看起来不错,灰色。白色的潮汐水箱有助于保持清洁,并将三个排水管放在储罐中的左角溢出下方。我试图在需要的地方合并螺纹配件和工会,以使其易于断开连接。我很高兴我在Pure Reef上听Jorge,以在看台侧面添加一扇隐藏的门!它使管道变得轻而易举,而不必扭曲自己的立场。
由于我失去了地下室的污泥,因此我不得不提出一种将盐水从地下室运出的方法,还可以添加远程的顶级设置。Rodi仍然驻留在水箱正下方的地下室中。对于自动topoff,我安装了Chem-Tech Pulsafeeder(与珊瑚礁填充剂给药泵相同)。manbetx2.0ios下载它在将水泵到18英尺方面非常有效。对于盐水,我将一个混合台与RO/DI一起置于混合站,由两个橡胶母野蛮垃圾桶组成。我想在道路上增加更多的体积,但野蛮人现在会做。盐水与我躺在周围的旧Eheim 1262混合。然后,我添加了一个MAG 24,然后用1英寸的乙烯基管置于楼上的水底。油管将链条连接到PVC栅极以调节流量。该泵一直连接到礁石到开关的插座。 Water changes are nice and easy. I siphon out the water with a python gravel vac first, then flick on the switch to pump fresh saltwater out of the basement. It’s not as neatly executed as some examples I have seen online, but it works.
My old tank ran on an ancient Neptune Aquacontroller 3. It still did everything I needed it to, but I found the newer interface on the Apex appealing. After speaking with Terrence at Neptune, I learned I could use my old DC-8 power strips with an Apex Base Unit and Display. This was an affordable way for me to upgrade to the Apex. Since I was modernizing a 10 year old reef, it was logical to modernize the brains operating the whole system.
为了保持整洁,我合并了一些电缆组织轨道,并将电气安装到连接的看台内的面板上。从看台底部取出东西会创造空间,并使事情更容易清洁。我仍然可以进行一些打扫措施,但我现在很满意。我使用标签制造商来识别一些关键管道和插座。如果有问题,这使通过电话指导某人变得更容易。最后,我添加了一些Rev-a架门的门柜来容纳食物和添加剂。新万博登录网址
Next came the tapwater leak test. As expected, some of the threaded fittings leaked. A little more pipe dope did the trick. It was good to see how sealed the overflow and sump compartments were at filling time. Each section stayed bone dry until water overflowed into that compartment. A testament to the build quality of the tank and sump. The next day, I drained the tapwater and started the boring task of filling it with RO/DI water. The slowness of my 70 gallon per day RO/DI unit added some more delays to an already constrained timeline. The baby’s due date was quickly approaching. At this point, all the painting/plumbing/fixing had kept me up late many nights. I worried I was making myself exhausted before the newborn arrived. I knew sleep would be rare with a baby, so I started to have some doubts about this whole reboot. But there was no turning back.
Overall, I feel the planning and customizations worked out as I had hoped. A single overflow versus two meant more space in the tank and less complicated plumbing. The taller stand made things easier to fit, and the hidden side door made plumbing that corner overflow a breeze. Next up was mixing salt, adding rock, and reintroducing the livestock!